• User-Friendly Programmable Touchscreen Operation - Potential Applications Expanded
• Easy Positive Micropipet Attachments - No O-Rings Required
• Proven Hydraulic Technology - Ensures Accurate and Consistent Injection Volumes
• Universal Power Source - Supplied with 4 Interchangeable Adapter Plugs

Nanoject II vs. Nanoject III

Nanoject II	FEATURES	Nanoject III
3-000-204, 110V	Catalog number, 110V	3-000-207
3-000-205A, Euro.	Catalog number, European plug	3-000-207
3-000-206A, UK	Catalog number, UK plug	3-000-207
2.3 nL-69 nL	Injection volumes	0.6 nL-999.9 nL
46nL/sec.& 23 nL/sec. only	Rate of injection	1 nL/sec.-200 nL/sec.
No	Injection counter	Yes
No	Programmable multiple injections	Yes
No	Programmable frequency between injections	Yes
No	Program storage capability	Yes, 8 programs
No	Auto HOMING of plunger	Yes
3 O-rings, replacement necessary	Micropipette attachment	No O-rings, new chuck simplifies micropipette attachment
10 µm minimum	Micropipette I.D. size	2-3 µm minimum
Yes; inject only	Optional Footswitch	Yes; fill, empty and inject capability
No; fill, empty, inject buttons only	Color Touch Sensitive Keypad	Yes; multi screens

Both units utilize the same glass capillaries for pulling micropipettes; however, note that significantly smaller pipettes can be used with the Nanoject III due to the new improved method of securing the micropipette. No O-rings to wear out are used. A micro ?chuck? is used that is not a wear item and it simplifies attachment of the micropipette once backfilled with oil.

The auto HOMING feature will eliminate the need to ?rehome? the unit as in the Nanoject II and this will reduce if not totally eliminate jamming of the plunger.

The Next Generation in High Precision Nanoliter Microinjection.

The new Drummond Programmable Nanoject III Nanoliter Injector offers a number of state-of-the-art features to provide easy setup and operation as well as more accurate injection volumes down to 0.6 nanoliters. The Nanoject III does not require any O-rings to secure the micropipet. Operational Modes enable the user to program the unit to do single manual injections, as well as multiple injection cycle recipes. Program input and execution is enabled by prompted touchscreens located on the control box. Programmability, the lower injection volume capability plus the user's ability to select the injection rate widens the potential range of applications for the Nanoject III. The Universal Power Source provides adapter plugs to enable the unit to be used in the US, UK, Europe, and Australia simply by inserting the proper plug.